Remove outer protective wrapper.
Inspect the rim for damage such as chips, surface nicks or gouges where
the bead will rest.
Properly hold rim so tire can be slid over rim. It helps to spray or wipe
a tire lubricant on bead area to ease mounting. Lubricants can be bought at NAPA
store and are called “tire mounting soap”. A Windex type product also works as a
Use a tire band to control tire expansion when mounting on the rim. Using
more spray will help the tire glide or pop onto the rim for proper tire seating
against the rim flange.
Do not exceed 4 bars or 62 psi when mounting the tire to the rim.
Do not use heat to expand tire on rim during the mounting.
Design by B/Z
Web site comments to:
Copyright © 2011 B/Z
Technologies. All rights reserved.